TL064IN
Or copy the link below:
- Mfr.Part #
- TL064IN
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP JFET 4 CIRCUIT 14DIP
- Stock
- 28,167
- In Stock ：
- 28,167
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Current - Output / Channel :
- 20 mA
- Current - Supply :
- 200µA (x4 Channels)
- Operating Temperature :
- -40°C ~ 85°C
- Gain Bandwidth Product :
- 1 MHz
- Amplifier Type :
- J-FET
- Slew Rate :
- 3.5V/µs
- Number of Circuits :
- 4
- Supplier Device Package :
- 14-PDIP
- Mounting Type :
- Through Hole
- Voltage - Input Offset :
- 3 mV
- Current - Input Bias :
- 30 pA
- Voltage - Supply Span (Min) :
- 10 V
- Product Status :
- Active
- Output Type :
- -
- -3db Bandwidth :
- -
- Voltage - Supply Span (Max) :
- 30 V
- Datasheets
- TL064IN
4 Channels 30pA 80 dB Instrumentational OP Amps 0.02μA 18V 7V~36V ±3.5V~18V TL064 14 Pins 14-DIP (0.300, 7.62mm)
TL064IN Overview
Packaging for the buffer amplifier is in the form of a 14-DIP (0.300, 7.62mm) case. A J-FET-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 6mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 200μA , this buffer op amp will be able to operate. Keeping the voltage gain at 75.56dB is the best course of action. 4 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 18V.
TL064IN Features
14 Pins
supply voltage of 15V
75.56dB voltage gain
TL064IN Applications
There are a lot of Texas Instruments
TL064IN Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
