TL064CDBR
Or copy the link below:
- Mfr.Part #
- TL064CDBR
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP JFET 4 CIRCUIT 14SSOP
- Stock
- 32,078
- In Stock ：
- 32,078
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- -3db Bandwidth :
- -
- Mounting Type :
- Surface Mount
- Voltage - Supply Span (Max) :
- 30 V
- Supplier Device Package :
- 14-SSOP
- Product Status :
- Obsolete
- Current - Supply :
- 200µA (x4 Channels)
- Voltage - Input Offset :
- 3 mV
- Current - Input Bias :
- 30 pA
- Current - Output / Channel :
- 20 mA
- Number of Circuits :
- 4
- Voltage - Supply Span (Min) :
- 10 V
- Output Type :
- -
- Gain Bandwidth Product :
- 1 MHz
- Operating Temperature :
- 0°C ~ 70°C
- Slew Rate :
- 3.5V/µs
- Amplifier Type :
- J-FET
- Datasheets
- TL064CDBR
30pA 70 dB Instrumentational OP Amps 0.01μA 18V 7V~36V ±3.5V~18V TL064 14 Pins 14-SSOP (0.209, 5.30mm Width)
TL064CDBR Overview
In order to protect the op amps, a 14-SSOP (0.209, 5.30mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 3mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 200μA and 10 . Maintain 75.56dB as the voltage gain. In total, there are 4 circuits on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. As a result of this, the buffer amplifier is packed in TAPE AND REEL.
TL064CDBR Features
14 Pins
supply voltage of 15V
75.56dB voltage gain
TL064CDBR Applications
There are a lot of Texas Instruments
TL064CDBR Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
