TL052ID
Or copy the link below:
- Mfr.Part #
- TL052ID
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP JFET 2 CIRCUIT 8SOIC
- Stock
- 40,286
- In Stock ：
- 40,286
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Mounting Type :
- Surface Mount
- Output Type :
- -
- Amplifier Type :
- J-FET
- -3db Bandwidth :
- -
- Current - Supply :
- 4.8mA (x2 Channels)
- Number of Circuits :
- 2
- Current - Input Bias :
- 30 pA
- Voltage - Input Offset :
- 650 µV
- Voltage - Supply Span (Min) :
- 10 V
- Product Status :
- Active
- Voltage - Supply Span (Max) :
- 30 V
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Current - Output / Channel :
- 80 mA
- Gain Bandwidth Product :
- 3 MHz
- Slew Rate :
- 20.7V/µs
- Supplier Device Package :
- 8-SOIC
- Datasheets
- TL052ID
2 Channels 80mA per Channel 30pA 75 dB Instrumentational OP Amps 15V 10V~30V ±5V~15V TL052 8 Pins 8-SOIC (0.154, 3.90mm Width)
TL052ID Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the J-FET-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 3.5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 4.8mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 95.42dB for the time being. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 15V.
TL052ID Features
8 Pins
supply voltage of 5V
95.42dB voltage gain
TL052ID Applications
There are a lot of Texas Instruments
TL052ID Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
