TL031CD
Or copy the link below:
- Mfr.Part #
- TL031CD
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP JFET 1 CIRCUIT 8SOIC
- Stock
- 606
- In Stock ：
- 606
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Amplifier Type :
- J-FET
- Output Type :
- -
- Number of Circuits :
- 1
- Current - Input Bias :
- 2 pA
- Voltage - Supply Span (Min) :
- 10 V
- Voltage - Supply Span (Max) :
- 30 V
- Current - Output / Channel :
- 40 mA
- Gain Bandwidth Product :
- 1.1 MHz
- Supplier Device Package :
- 8-SOIC
- Product Status :
- Active
- Mounting Type :
- Surface Mount
- Current - Supply :
- 217µA
- -3db Bandwidth :
- -
- Voltage - Input Offset :
- 500 µV
- Slew Rate :
- 5.1V/µs
- Operating Temperature :
- 0°C ~ 70°C
- Datasheets
- TL031CD
1 Channels 40mA per Channel 2pA 75 dB Instrumentational OP Amps 0.0004μA 15V 10V~30V ±5V~15V TL031 8 Pins 8-SOIC (0.154, 3.90mm Width)
TL031CD Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the J-FET type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 500μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 217μA, this op amp ic can operate. 81.58dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 15V.
TL031CD Features
8 Pins
supply voltage of 5V
81.58dB voltage gain
TL031CD Applications
There are a lot of Texas Instruments
TL031CD Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
