SP481ECP-L
Or copy the link below:
- Mfr.Part #
- SP481ECP-L
- Manufacturer
- MaxLinear
- Package / Case
- Datasheet
- Download
- Description
- IC TRANSCEIVER HALF 1/1 8DIP
- Stock
- 1,103
- In Stock ：
- 1,103
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- MaxLinear
- Product Category :
- Drivers, Receivers, Transceivers
- Data Rate :
- 10Mbps
- Duplex :
- Half
- Receiver Hysteresis :
- 20 mV
- Number of Drivers/Receivers :
- 1/1
- Protocol :
- RS422, RS485
- Mounting Type :
- Through Hole
- Type :
- Transceiver
- Operating Temperature :
- -40°C ~ 85°C
- Product Status :
- Obsolete
- Supplier Device Package :
- 8-PDIP
- Voltage - Supply :
- 4.75V ~ 5.25V
- Datasheets
- SP481ECP-L
5V 8 Pin Receivers 1 Bits 1 Functions Min 4.75V V Max 5.25V V
SP481ECP-L Overview
Due to the enhanced PDIP package, this driver IC is excellent for driving common LEDs.With a voltage range of 5V, this driver IC can operate efficiently.In this package, you will find 8 market-standard pinouts for this transceiver.An enhanced power dissipation driver IC with 8 pins.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Through Hole mounting technologies.It is important to note that this ic receiver had a maximum resolution of 1 bits.There is typically a resolution of 1 bits specified with this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.Driver ICs such as this one are designed to operate from 5V power sources.Below 70°C is the required transceiver module's operating temperature.This optical transceiver should not operate at a temperature lower than 0°C.As far as the transceiver's maximum supply voltage of this IC is concerned, it is rated at 5.25V.1 transmitters are present, which produce radio waves for the purpose of transmitting or sending data.For this line driver ic, a minimum supply voltage of 4.75V is required.The optical transceiver module can power devoptical transceiver modulees with a voltage of 3V.An average output current of only 1μA is typical for this wide receiver.
SP481ECP-L Features
8 pin count
8 pins
5V power supply
SP481ECP-L Applications
There are a lot of Exar Corporation
SP481ECP-L Drivers/Receivers/Transceivers applications.
- Wireless modems
- Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
