OPA300AIDBVT
Or copy the link below:
- Mfr.Part #
- OPA300AIDBVT
- Manufacturer
- Texas Instruments
- Package / Case
- SOT-23-6
- Datasheet
- Download
- Description
- IC OPAMP VFB 1 CIRCUIT SOT23-6
- Stock
- 30,863
- In Stock ：
- 30,863
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- -3db Bandwidth :
- -
- Current - Supply :
- 9.5mA
- Mounting Type :
- Surface Mount
- Number of Circuits :
- 1
- Gain Bandwidth Product :
- 150 MHz
- Operating Temperature :
- -40°C ~ 125°C
- Voltage - Supply Span (Max) :
- 5.5 V
- Current - Output / Channel :
- 70 mA
- Current - Input Bias :
- 0.1 pA
- Voltage - Supply Span (Min) :
- 2.7 V
- Product Status :
- Active
- Slew Rate :
- 80V/µs
- Output Type :
- -
- Supplier Device Package :
- SOT-23-6
- Voltage - Input Offset :
- 1 mV
- Amplifier Type :
- Voltage Feedback
- Package / Case :
- SOT-23-6
- Datasheets
- OPA300AIDBVT
70mA per Channel 0.1pA 66 dB Instrumentational OP Amps 0.000005μA 2.75V 2.7V~5.5V ±1.35V~2.75V OPA300 6 Pins SOT-23-6
OPA300AIDBVT Overview
Packaged in a SOT-23-6 case, the buffer op amp is ready to use. An op amp ic of the Voltage Feedback type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 6. The pins on this board total to 6 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 6 pins are present on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 9.5mA, this op amp ic can operate. 106dB should remain the voltage gain. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 2.75V. For packing the buffer amplifier, the TR-axis is adopted.
OPA300AIDBVT Features
6 Pins
supply voltage of 5V
106dB voltage gain
OPA300AIDBVT Applications
There are a lot of Texas Instruments
OPA300AIDBVT Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
