MTS62C19A-LS105

Share

Or copy the link below:

Mfr.Part #
MTS62C19A-LS105
Manufacturer
Microchip Technology
Package / Case
Datasheet
Download
Description
IC MTR DRV BIPOLR 4.5-5.5V 24SOP
Stock
31,932
In Stock :
31,932

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Microchip Technology
Product Category :
Motor Drivers, Controllers
Voltage - Supply :
4.5V ~ 5.5V
Motor Type - AC, DC :
Brushed DC
Applications :
Automotive
Product Status :
Active
Supplier Device Package :
24-SOP
Output Configuration :
Half Bridge (4)
Technology :
CMOS
Motor Type - Stepper :
Bipolar
Step Resolution :
1, 1/2, 1/4, 1/8
Mounting Type :
Surface Mount
Voltage - Load :
10V ~ 40V
Interface :
On/Off
Operating Temperature :
-40°C ~ 150°C (TJ)
Current - Output :
550mA
Function :
Driver - Fully Integrated, Control and Power Stage
Datasheets
MTS62C19A-LS105
VESS Electronics offers Motor Drivers, Controllers Microchip Technology MTS62C19A-LS105, where excellence in quality meets cost-effectiveness. This premier offering shines with its comprehensive list of features, including Mounting Type:Surface Mount, Operating Temperature:-40°C ~ 150°C (TJ), MTS62C19A-LS105 pinout, MTS62C19A-LS105 datasheet PDF, MTS62C19A-LS105 amp .Beyond Motor Drivers, Controllers Microchip Technology MTS62C19A-LS105 ,we also present a selection of DRV2605YZFR, DRV8816PWPR, STSPIN250, Our extensive stock is ready to fulfill your requirements. Connect with us now for tailored solutions.

800 uA mA 7.518mm mm Motor Drivers 24 5V V 15.697mm mm

MTS62C19A-LS105 Overview


The package contains [0].There is 24-SOIC (0.295, 7.50mm Width) case included with the part.A mounting position of Surface Mountis recommended for the part.Fits the component connected to Automotive.There is a possibility of providing 4.5V~5.5Vvolts through the device.In terms of operating temperature, it falls within the range -40°C~150°C TJ.A motor of this type can be categorized as Brushed DC.In this part, there are 24 terminations available.In this case, the voltage can be applied to the load at the rate of 10V~40V.Drivers controllers is recommended that this amplifier be run at 5V.There is Surface Mount recommended mounting method for this device.Maintain a 550mAoutput current for the part.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.Using the MTS62C19Apart number, it is located.There are 24 pins on it.2outputs are available.The driver is powered by a 30Vvolt supply.In this case, the output voltage is maintained at --.Featuring a 750 mAoutput current, this device provides maximum design flexibility.Also, ALSO REQUIRED LOAD SUPPLY VOLTAGE OF 10V TO 40Vcan be found as a characteristic of this type.Maximum operating temperature is 85 °C.Controller ic is recommended that the operating temperature be higher than -20 °C.In order to operate it, 800 uAsupply current is used.In total, there are 24pins on the part.This device is capable of being applied with a maximum supply voltage of 40 V.With a minimum supply voltage of [0], the device can function.

MTS62C19A-LS105 Features


Applications : Automotive
Load voltage across the chip 10V~40V
base on MTS62C19A number
designed with 2 outputs
Additional Feature: ALSO REQUIRED LOAD SUPPLY VOLTAGE OF 10V TO 40V
with 24 pins


MTS62C19A-LS105 Applications


There are a lot of Microchip Technology
MTS62C19A-LS105 motor drivers applications.


  • Hospitality buildings
  • Smart lighting applications
  • Automotive applications
  • Dome
  • Dash
  • Footwell lighting
  • Indicator
  • Telltale lights
  • Infotainment backlighting
  • Tail lights
Purchase

You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • Texas Instruments
    12-V, 1.76-A BRUSHED DC MOTOR DR
  • Texas Instruments
    IC MOTOR DRVR 1.65V-5.5V 10WSON
  • Texas Instruments
    20-V, 1-A H-BRIDGE MOTOR DRIVER
  • Texas Instruments
    IC HALF-BRIDGE DRVR PWM 8WSON
  • Texas Instruments
    12-V, 2-A LOW VOLTAGE H-BRIDGE M

Related products

Part Manufacturer Stock Description
MTS62C19A-HS105 Microchip Technology 39,910 IC MTR DRV BIPOLR 4.5-5.5V 24SOP
RFQ