MPY634KP

MPY634KP Overview

For its packaging, Tube are used.For cost-effectiveness, it has been included in the 14-DIP (0.300, 7.62mm) package.There is a common practice of using 4-Quadrant bits per stage.Powered by a voltage of 15V, it operates on a DC supply.It is provided with a nominal negative supply voltage of -15V.Modulated radio-frequency signals occupy the frequency range of 10MHz.This part number MPY634 has a number of similarities to other electronic parts.Known for its superior performance and high quality, it is a type of 14-pin electronic component.On the PCB, it is mounted using Through Hole.Ideally, the electronic device should operate at a temperature of 85°C.A minimum temperature of -40°C should be maintained for the operation of the electronic device.Ideally, it should be used with an operating supply voltage of 4mA.It is recommended that the dual supply voltage be higher than 8V.It is recommended to have a dual supply voltage lower than 18V.The unit is powered by a dual supply voltage of 15V.15V is the supply voltage at which it can operate.There is a limitation on the maximum supply voltage at 18V.For normal operation, a minimum supply voltage of 8V is maintained.Failures should not occur if the frequency exceeds 10MHz.The 4 amplifiers provide high efficiency by working together.It is a well-known part of the MPY series and is used in many different applications.The device is configured with channels of type 1.

MPY634KP Features

Supplied in the 14-DIP (0.300, 7.62mm) package
Bandwidth of 10MHz
Operating supply current of 4mA
Operating supply voltage of 15V
4 amplifiers

MPY634KP Applications

There are a lot of Texas Instruments
MPY634KP Analog Multipliers & Dividers applications.

• single/dual op amp sum and difference circuits
• Integrator and differentiator circuits
• Logarithmic and exponential operation circuits
• Multiplication and division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering