MIC38C45AYM
Or copy the link below:
- Mfr.Part #
- MIC38C45AYM
- Manufacturer
- Microchip Technology
- Package / Case
- Datasheet
- Download
- Description
- IC REG CTRLR MULT TOPOLOGY 8SOIC
- Stock
- 45
- In Stock ：
- 45
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- DC DC Switching Controllers
- Output Phases :
- 1
- Topology :
- Buck, Boost, Flyback, Forward Converter
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Frequency - Switching :
- 500kHz
- Product Status :
- Active
- Serial Interfaces :
- -
- Duty Cycle (Max) :
- 50%
- Clock Sync :
- No
- Mounting Type :
- Surface Mount
- Voltage - Supply (Vcc/Vdd) :
- 7.6V ~ 20V
- Function :
- Step-Up, Step-Down, Step-Up/Step-Down
- Synchronous Rectifier :
- Yes
- Output Type :
- Transistor Driver
- Number of Outputs :
- 1
- Control Features :
- Frequency Control
- Output Configuration :
- Positive, Isolation Capable
- Supplier Device Package :
- 8-SOIC
- Datasheets
- MIC38C45AYM
7.6V~20V 8-Pin MIC38C45 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 500kHz Transistor Driver
MIC38C45AYM Overview
With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 7.6V~20V. Worked in an dc switcher with a -40°C~85°C TA rating. Switching can be done at 500kHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15 V. Search for "MIC38C45" to find other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. In particular, switching converter is a type of PMIC - Power Management ICs. The test statistics indicate that DC regulator outputs a voltage of 5V. You should note that the dc dc regulator's usual output current is 500mA. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. To run the voltage regulator dc to dc safely and reliably, users should apply 8.4V to the voltage regulator dc to dc. Current is output to the greatest value of 0.5 A. Ideally, dc regulator should be kept at a temperature of -40°C or higher. The temperature should not exceed 85°C degrees Celsius. The dc to dc voltage regulator belongs to the -- series. In total, the switch converters have 1 function (s). The supplier dc dc controller package for this part would be 8-SOIC. The supply current is 4mA. There are 1 phases in this controller. This switching controller can switch at a frequency of 500 kHz. In terms of maximum supply voltage, switching voltage regulators is rated 20V. The frequency at which this controller performs well is 500 kHz.
MIC38C45AYM Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Switching Frequency: 500 kHz
MIC38C45AYM Applications
There are a lot of Microchip Technology
MIC38C45AYM DC to DC converter applications.
- Servo drive system
- Digital display device
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
