MIC38C43YM
Or copy the link below:
- Mfr.Part #
- MIC38C43YM
- Manufacturer
- Microchip Technology
- Package / Case
- Datasheet
- Download
- Description
- IC REG CTRLR MULT TOPOLOGY 8SOIC
- Stock
- 180
- In Stock ：
- 180
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- DC DC Switching Controllers
- Function :
- Step-Up, Step-Down, Step-Up/Step-Down
- Voltage - Supply (Vcc/Vdd) :
- 7.6V ~ 20V
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Output Phases :
- 1
- Serial Interfaces :
- -
- Product Status :
- Active
- Output Type :
- Transistor Driver
- Supplier Device Package :
- 8-SOIC
- Control Features :
- Frequency Control
- Clock Sync :
- No
- Mounting Type :
- Surface Mount
- Topology :
- Buck, Boost, Flyback, Forward Converter
- Frequency - Switching :
- 500kHz
- Number of Outputs :
- 1
- Duty Cycle (Max) :
- 96%
- Synchronous Rectifier :
- Yes
- Output Configuration :
- Positive, Isolation Capable
- Datasheets
- MIC38C43YM
7.6V~20V 8-Pin MIC38C43 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 500kHz Transistor Driver
MIC38C43YMM Overview
The switching controller fits in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tube rating. There are Transistor Driver dc switching's output (s) that it can handle. A 7.6V~20V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 500kHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 15 V. Other relevant dc to dc converter ics will be returned if you search "MIC38C43". Total pins of switching converter are 8. Particularly, switching converter is a type of PMIC - Power Management ICs. A 5V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 500mA. The duty cycle of the voltage regulator dc to dc can be set to 96 % on power-up or power-down to ensure reliability. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is 500kHz frequency setting on the switching controller. To operate the voltage regulator dc to dc safely and reliably, users should apply 20 V. Whenever the current value is 0.5 A, switching converter outputs the highest possible value. At -40°C and above, dc regulator should be kept. At a temperature around 85°C degrees Celsius, dc regulator should be running. It belongs to the dc to dc voltage regulator series --. Overall, the switch converters contains 1 function(s). Its supplier dc dc controller package is 8-MSOP. There is a 4mA volt supply current. The controller switches with phase number 1. 500 kHz is the highest frequency at which the switching controller can switch. When it comes to maximum supply voltage, switching voltage regulators is rated 20V. The component might suffer damage if the current exceeds 6mA. When this switching controller is running at frequency 500 kHz, it can perform well in most cases.
MIC38C43YMM Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 500kHz
Switching Frequency: 500 kHz
MIC38C43YMM Applications
There are a lot of Microchip Technology
MIC38C43YMM DC to DC converter applications.
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
- Injection molding machinery
- Various CNC machine tools
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
