MCP3553-E/SN
Or copy the link below:
- Mfr.Part #
- MCP3553-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- Datasheet
- Download
- Description
- IC ADC 22BIT SIGMA-DELTA 8SOIC
- Stock
- 5,845
- In Stock ：
- 5,845
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Analog to Digital Converters (ADC)
- Ratio - S/H:ADC :
- -
- Voltage - Supply, Digital :
- 2.7V ~ 5.5V
- Data Interface :
- SPI
- Mounting Type :
- Surface Mount
- Architecture :
- Sigma-Delta
- Reference Type :
- External
- Configuration :
- ADC
- Number of Bits :
- 22
- Number of Inputs :
- 1
- Supplier Device Package :
- 8-SOIC
- Features :
- -
- Operating Temperature :
- -40°C ~ 125°C
- Input Type :
- Differential
- Sampling Rate (Per Second) :
- 60
- Voltage - Supply, Analog :
- 2.7V ~ 5.5V
- Number of A/D Converters :
- 1
- Product Status :
- Active
- Datasheets
- MCP3553-E/SN
22 Bit ADC -- Series MCP3553 2.7V 8-SOIC (0.154, 3.90mm Width)
MCP3553-E/SN Overview
The analogue to digital converter is designed with 22 Bits.The AD converter is embedded in the 8-SOIC (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 2.7V.The A/D converter has 1 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 60 Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2.575 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MCP3553 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.Surface Mount allows the ADC converter to be mounted.The ADC converter operates with the maximal supply voltage of 5.5V.1 inputs are employed.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 5V.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 60 sps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. There are 1 Converter converters, which will convert numbers to words and figures to words. The ADC converter consists of 1 elements.There are 1 analog transmissions, which are both based on how they adapt data to combine an input signal with a carrier signal. It is a type of FPGA belonging to the -- series.It employs 8-SOIC as its supplier device package.The reference voltage amounts to EXTERNAL(V).
MCP3553-E/SN Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 2.7V
1 elements
-- series
MCP3553-E/SN Applications
There are a lot of Microchip Technology
MCP3553-E/SN ADC applications.
- Digital Multimeters, PLC's (Programming Logic Controllers)
- RADAR processing, digital oscilloscopes
- CMOS Image sensors for mobile applications
- Medical Instrumentation and medical imaging
- Music recording
- Digital signal processing
- Scientific instruments
- Rotary encoder
- Displaying
- Transducer
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
