MCP2003-E/SN

MCP2003-E/SN Overview

This driver chip is excellent for driving common LEDs due to its enhanced 8-SOIC (0.154, 3.90mm Width) package.The package of this receiver is Tube.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes 6V~27V from the power supply to run this differential driver.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver is designed for applications with a temperature of -40°C~125°C.Driver ICs in this category can operate efficiently with a supply voltage range of 12V.Wide receiver has 8 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.Since the base part number MCP2003 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver IC with improved power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.It provided a 1-bit resolution capability with this ic receiver.As a general rule, this receiver has a resolution of 1 bits that is usually specified.There is a voltage input supply of 6 V to 27 V required for the operation of this integrated circuit.A rf transceiver module named Interface ICs belongs to this subcategory.There are 2 transceivers in total implemented by this IC.On the part, 1 drivers are embedded in order to facilitate the operation of the device.ICs with THERMAL SHUTDOWN functions also improve the overall stability and accuracy of signal management.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 90μA.In ic receiver, the interface IC type used for managing and controlling information sharing is LINE TRANSCEIVER.A malfunction could occur when the input current exceeds 1mA.In order to achieve this, we have opted to use the 8-SOIC supplier package for wide receiver.An integrating circuit in the -- series represents an enhanced power-saving feature.At 27V, Wide receiver is able to deliver voltage to the load.In this bluetooth transceiver, the output current is rated at 200mA.An rf transceiver module based on this design contains 8 terminals, including external ones.

MCP2003-E/SN Features

Tube package
8 pin count
8 pins
-- series
8 terminals used for its configuration

MCP2003-E/SN Applications

There are a lot of Microchip Technology
MCP2003-E/SN Drivers/Receivers/Transceivers applications.

• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC
• Desktop radio
• Clock radio
• Tuner
• Portable radio
• Car radio
• Satellite radio receiver