MCP14E9-E/P

MCP14E9-E/P Overview

For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Tube represents the package.Configuration is based on 2 drivers.Through Hole is the way in which it is mounted.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.Gate type IGBT, N-Channel, P-Channel MOSFET is designed for it.This device can operate at temperatures up to -40°C~150°C TJ.Inverting is used as the input type.Its configuration is based on a total of 8 terminations.There are various parts that can be found under its base part number MCP14E9.At the time of design, it is configured with 8 pins.In order to operate, a voltage of 12V has to be applied.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 3A.The board has 8 component pins.For its basis, there are 2 outputs integrated.3A is the maximum output current supported by the device.Having the maximum power dissipation of 1.12W indicates its maximum capacity to conduct power losses without overheating.As a precaution, make sure the supply current is kept at 1.8mA.Using its power supply of 4.5/18 V, it provides solutions to diverse power supply problems.18V is the output voltage.There are several gate drivers in the -- series, including this one.With a 1.8 mA supply voltage, it operates.In order to develop its basis, 8 terminals are used.

MCP14E9-E/P Features

Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.12W
Operating with the supply voltage of --

MCP14E9-E/P Applications

There are a lot of Microchip Technology
MCP14E9-E/P gate drivers applications.

• Portable computers
• High-speed communications
• RGB applications
• Broadcast equipment
• Active filtering
• Head-up and Head mounted displays
• High current laser/LED systems
• LCD/LCoS/DLP portable and embedded pico projectors
• Multicolor LED/laser displays
• Smart Phones