MCIMX283CVM4C
Or copy the link below:
- Mfr.Part #
- MCIMX283CVM4C
- Manufacturer
- NXP Semiconductors
- Package / Case
- 289-LFBGA
- Datasheet
- Download
- Description
- IC MPU I.MX28 454MHZ 289MAPBGA
- Stock
- 29,864
- In Stock ：
- 29,864
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- NXP Semiconductors
- Product Category :
- Microprocessors
- Supplier Device Package :
- 289-MAPBGA (14x14)
- Product Status :
- Active
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Speed :
- 454MHz
- RAM Controllers :
- LVDDR, LVDDR2, DDR2
- Ethernet :
- 10/100Mbps (1)
- Number of Cores/Bus Width :
- 1 Core, 32-Bit
- Co-Processors/DSP :
- Data; DCP
- Display & Interface Controllers :
- Keypad, LCD, Touchscreen
- Voltage - I/O :
- 1.8V, 3.3V
- Graphics Acceleration :
- No
- Security Features :
- Boot Security, Cryptography, Hardware ID
- Core Processor :
- ARM926EJ-S
- SATA :
- -
- USB :
- USB 2.0 + PHY (2)
- Package / Case :
- 289-LFBGA
- Datasheets
- MCIMX283CVM4C
ARM926EJ-S Microprocessor i.MX28 Series MCIMX283 289-LFBGA
MCIMX283CVM4C Description
The i.MX28 is a low-power, high-performance applications processor optimized for the general embedded industrial and consumer markets. The core of the
i.MX28 is NXP's fast, power-efficient implementation of the ARM926EJ-S™ core, with speeds of up to 454 MHz. The integrated power management unit (PMU)
on the i.MX28 is composed of a triple-output DC-DC switching converter and multiple linear regulators. These provide power sequencing for the device and
its I/O peripherals such as memories and SD cards, as well as provide battery charging capability for Li-Ion batteries.
MCIMX283CVM4C Features
128 KBytes of integrated low-power on-chip SRAM
128 KBytes of integrated mask-programmable on-chip ROM
1280 bits of on-chip one-time-programmable (OCOTP) ROM
16-bit mobile DDR (mDDR) (1.8 V), DDR2 (1.8 V), and LV-DDR2 (1.5 V), up to 205 MHz DDR clock frequency with voltage overdrive
Support for up to eight NAND Flash memory devices with up to 20-bit BCH ECC
Two 2.0B protocol-compatible Controller Area Network (CAN) interfaces
One USB2.0 OTG device/host controller and PHY
One USB2.0 host controller and PHY
LCD controller, up to 24-bit RGB (DOTCK) modes, and 24-bit system-mode
MCIMX283CVM4C Applications
Human-machine interface (HMI) panels: industrial, home
Industrial Drive, PLC, I/O control display, factory robotics display, graphical remote controls
Handheld scanners and printers
Patient-monitoring, portable medical devices
Smart energy meters, energy gateways
Media phones, media gateways
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
