LT6002CDHC#PBF
Or copy the link below:
- Mfr.Part #
- LT6002CDHC#PBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- 16-WFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 16DFN
- Stock
- 120
- In Stock ：
- 120
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage - Input Offset :
- 500 µV
- Product Status :
- Active
- Current - Supply :
- 13µA (x4 Channels)
- -3db Bandwidth :
- -
- Slew Rate :
- 0.015V/µs
- Output Type :
- Rail-to-Rail
- Number of Circuits :
- 4
- Operating Temperature :
- -40°C ~ 85°C
- Amplifier Type :
- General Purpose
- Voltage - Supply Span (Max) :
- 16 V
- Current - Output / Channel :
- 10 mA
- Voltage - Supply Span (Min) :
- 1.8 V
- Current - Input Bias :
- 2 nA
- Mounting Type :
- Surface Mount
- Supplier Device Package :
- 16-DFN (5x3)
- Gain Bandwidth Product :
- 60 kHz
- Package / Case :
- 16-WFDFN Exposed Pad
- Datasheets
- LT6002CDHC#PBF
10 mA per Channel 2 nA 68(dB) Instrumentational OP Amps 0.01 µA 16 Pins 16-WFDFN Exposed Pad
LT6002CDHC#PBF Overview
Packaging for the buffer amplifier is in the form of a 16-WFDFN Exposed Pad case. A General Purpose-type buffer amplifier is shown here. There is a Rail/Tube case that is delivered with the instrumentation amplifiers. Buffer amplifier has a total of 16 pins on it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 16-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 500 µV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C ~ 85°C as far as operating temperature is concerned. Using a supply current of 20 µA , this buffer op amp will be able to operate. Keeping the voltage gain at 120 dB is the best course of action. The buffer amp consists of 4 circuits in total. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 85 °C degrees. A total of 4 elements are present in this linear amplifier. A supply of 13µA (x4 Channels) or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 18 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 1.8 V, it is recommended to keep it higher. The LT® stands for the buffer op amp's serial number. There are a maximum of 10000 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. The buffer op amp has 16 terminals that can be used for connecting wires to the amplifier.
LT6002CDHC#PBF Features
16 Pins
120 dB voltage gain
Output Type: Rail-to-Rail
16Terminations
LT6002CDHC#PBF Applications
There are a lot of Analog Devices
LT6002CDHC#PBF Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
