LP2904DR
Or copy the link below:
- Mfr.Part #
- LP2904DR
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 53
- In Stock ：
- 53
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage - Supply Span (Min) :
- 3 V
- Operating Temperature :
- -40°C ~ 85°C
- Gain Bandwidth Product :
- 100 kHz
- Current - Supply :
- 54µA (x2 Channels)
- Voltage - Supply Span (Max) :
- 32 V
- Number of Circuits :
- 2
- Mounting Type :
- Surface Mount
- Product Status :
- Active
- Supplier Device Package :
- 8-SOIC
- Voltage - Input Offset :
- 2 mV
- Current - Input Bias :
- 2 nA
- -3db Bandwidth :
- -
- Current - Output / Channel :
- 10 mA
- Output Type :
- -
- Amplifier Type :
- General Purpose
- Slew Rate :
- 0.05V/µs
- Datasheets
- LP2904DR
10mA per Channel 2nA 80 dB Instrumentational OP Amps 16V 3V~32V ±1.5V~16V LP2904 8 Pins 8-SOIC (0.154, 3.90mm Width)
LP2904DR Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 4mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 85μA , this buffer op amp will be able to operate. Keeping the voltage gain at 96.9dB is the best course of action. A total of 2 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 16V. A TR-shaped amplifier is used to pack the buffer amps.
LP2904DR Features
8 Pins
supply voltage of 5V
96.9dB voltage gain
LP2904DR Applications
There are a lot of Texas Instruments
LP2904DR Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
