LP2902PW
Or copy the link below:
- Mfr.Part #
- LP2902PW
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14TSSOP
- Stock
- 365
- In Stock ：
- 365
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Gain Bandwidth Product :
- 100 kHz
- Supplier Device Package :
- 14-TSSOP
- Voltage - Supply Span (Min) :
- 3 V
- Current - Output / Channel :
- 10 mA
- Amplifier Type :
- General Purpose
- Operating Temperature :
- -40°C ~ 85°C
- Voltage - Supply Span (Max) :
- 32 V
- Current - Supply :
- 85µA (x4 Channels)
- Product Status :
- Active
- Output Type :
- -
- Slew Rate :
- 0.05V/µs
- Voltage - Input Offset :
- 2 mV
- Current - Input Bias :
- 2 nA
- Mounting Type :
- Surface Mount
- -3db Bandwidth :
- -
- Number of Circuits :
- 4
- Datasheets
- LP2902PW
10mA per Channel 2nA 80 dB Instrumentational OP Amps 0.02μA 16V 3V~32V ±1.5V~16V LP2902 14 Pins 14-TSSOP (0.173, 4.40mm Width)
LP2902PW Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 14 pins on it. Op amp rates 4mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 85μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 96.9dB for the time being. 4 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 16V.
LP2902PW Features
14 Pins
supply voltage of 5V
96.9dB voltage gain
LP2902PW Applications
There are a lot of Texas Instruments
LP2902PW Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
