L9826TR
Or copy the link below:
- Mfr.Part #
- L9826TR
- Manufacturer
- STMicroelectronics
- Package / Case
- Datasheet
- Download
- Description
- IC PWR DRIVER N-CHAN 1:8 20SOIC
- Stock
- 20,995
- In Stock ：
- 20,995
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- STMicroelectronics
- Product Category :
- Power Distribution Switches, Load Drivers
- Fault Protection :
- -
- Operating Temperature :
- -40°C ~ 150°C (TJ)
- Output Type :
- N-Channel
- Switch Type :
- Latched Driver
- Interface :
- SPI
- Input Type :
- -
- Supplier Device Package :
- 20-SO
- Rds On (Typ) :
- 1.5Ohm
- Product Status :
- Active
- Number of Outputs :
- 8
- Output Configuration :
- Low Side
- Voltage - Load :
- 45V (Max)
- Voltage - Supply (Vcc/Vdd) :
- 4.5V ~ 5.5V
- Features :
- -
- Ratio - Input:Output :
- 1:8
- Current - Output (Max) :
- 450mA
- Mounting Type :
- Surface Mount
- Datasheets
- L9826TR
5V N-Channel 1.27mm PMIC L9826 20 Pin 3MHz 5V 20-SOIC (0.295, 7.50mm Width)
L9826TR Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 20-SOIC (0.295, 7.50mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is Latched Driver.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 8 outputs that are available for use.With a supply voltage of 4.5V~5.5V, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the L9826 family.A total of 20 terminations can be found in it.During operation, the 20 pins are used.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 450mAV.To comply with the operation criteria, the maximum output current is reduced to 1A.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 20 pins.In this case, there is 1.5Ohm resistance in the LED driving board.It has a power supply of 5V.For maximum efficiency, the supply voltage should be set to 5V.This system has a maximum current requirement of 5mA.
L9826TR Features
Supplied from 5V
Resistance of 1.5Ohm
L9826TR Applications
There are a lot of STMicroelectronics
L9826TR Power Switches ICs applications.
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
- HDD, SSD
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
