L9339
Or copy the link below:
- Mfr.Part #
- L9339
- Manufacturer
- STMicroelectronics
- Package / Case
- Datasheet
- Download
- Description
- IC PWR DRIVER N-CHAN 1:1 20SOIC
- Stock
- 38,966
- In Stock ：
- 38,966
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- STMicroelectronics
- Product Category :
- Power Distribution Switches, Load Drivers
- Input Type :
- -
- Voltage - Load :
- 4.5V ~ 32V
- Features :
- Status Flag
- Number of Outputs :
- 4
- Interface :
- On/Off
- Supplier Device Package :
- 20-SO
- Current - Output (Max) :
- -
- Mounting Type :
- Surface Mount
- Ratio - Input:Output :
- 1:1
- Output Type :
- N-Channel
- Rds On (Typ) :
- 1.7Ohm
- Operating Temperature :
- -40°C ~ 150°C (TJ)
- Product Status :
- Active
- Switch Type :
- General Purpose
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Output Configuration :
- Low Side
- Fault Protection :
- Over Temperature
- Datasheets
- L9339
N-Channel 1.27mm PMIC L9339 20 Pin 20-SOIC (0.295, 7.50mm Width)
L9339 Overview
It is packaged in the manner of a Tube.There is a 20-SOIC (0.295, 7.50mm Width) package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 4 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Status Flag features.The L9339 family consists of this type.It consists of 20 terminations in total.In order to operate, the 20 pins are used.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 200mA.As a result, it is mounted in the manner of Surface Mount.A total of 20 pins are included in this LED driver.In this LED driving board, there is 1.7Ohm resistance.In this case, the output current will be set to 200mA.The LED driver is configured with a maximum supply voltage of 32V (Vsup).As a result of using this lighting driver, TTL AND CMOS COMPATIBLE INPUTS can also be produced.
L9339 Features
Resistance of 1.7Ohm
Additional features like TTL AND CMOS COMPATIBLE INPUTS
L9339 Applications
There are a lot of STMicroelectronics
L9339 Power Switches ICs applications.
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
