KA331

KA331 Overview

This package is embedded in the 8-DIP (0.300, 7.62mm) package. Electronic part Through Hole is mounted in this way. There is a package in the way of Tube. In this case, an electrical device of type Voltage to Frequency is being used. The 8 termination of a transmission line is the practice of terminating it with a device whose characteristic impedance matches that of the transmission line. Providing power to the device is a supply voltage of 5V. It is possible to discover parts that are related to the base part number. When a computer or other device is connected to the Internet, there are 8 pins, which are pronged contacts. For its reliability, it operates at a minimum operating temperature of 0°C. To ensure reliability, the device operates at a maximum operating temperature of 70°C. Through Hole mounted in the way. The supply voltage (Vsup) should be greater than 4.5V if it is suitable for use. As a result, 40V is reaching its maximum supply voltage (Vsup). There is a frequency 100kHz that it operates at. There is a voltage of 36V at which this electrical device operates. The type of supply for this electronic component is Single. An electronic part with a negative input type of -0.2V has the maximum negative input type. It is operated by a power supply of type 4.5/20V.

KA331 Features

8-DIP (0.300, 7.62mm) package
8 terminations
8 pins
4.5/20V power supplies

KA331 Applications

There are a lot of ON Semiconductor
KA331 V/F & F/V Converters applications.

• Clutch Control
• Horn Control
• Touch or Sound Switches
• lsolation of High Common-Mode Voltages
• Low-Cost Analog-to-Digital Conversion
• Battery Monitoring
• Automotive Sensing
• Voltage to Frequency Conversions
• Frequency to Voltage Conversions
• Remote-Sensor Monitoring