JM38510/37101B2A
Or copy the link below:
- Mfr.Part #
- JM38510/37101B2A
- Manufacturer
- Texas Instruments
- Package / Case
- -
- Datasheet
- Download
- Description
- 54ALS74A DUAL POSITIVE-EDGE-TRIG
- Stock
- 174
- In Stock ：
- 174
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Flip Flops
- Function :
- -
- Voltage - Supply :
- -
- Mounting Type :
- -
- Current - Output High, Low :
- -
- Type :
- -
- Operating Temperature :
- -
- Supplier Device Package :
- -
- Trigger Type :
- -
- Input Capacitance :
- -
- Max Propagation Delay @ V, Max CL :
- -
- Output Type :
- -
- Number of Bits per Element :
- -
- Clock Frequency :
- -
- Current - Quiescent (Iq) :
- -
- Package / Case :
- -
- Number of Elements :
- -
- Product Status :
- Active
- Datasheets
- JM38510/37101B2A
2 Bit Flip Flop QUAD 20 Pins * Series
JM38510/37101B2A Overview
As part of the package Rail/Tube, it is embedded. In the configuration, TTLis used as the output. This trigger uses the value POSITIVE EDGE. In terms of FPGAs, it belongs to the * series. The element count is 2 . A device of this type belongs to the family of ALS. It is mounted in the way of Surface Mount. There are 20pins on it. The clock edge trigger type for this device is Positive Edge. An electronic part with 2bits has been designed. It reaches 5.5 Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 4.5 V. A reliable performance of this D flip flop makes it well suited for use in TUBE. If high efficiency is to be achieved, the supply voltage should be maintained at 5 V. A high level output current of -400 µAis set. In the low level output current setting, the current is set to 4 mA. Ideally, the operating temperature should be below 125 °C. If the operating temperature is higher than -55 °C, the system should operate properly. In order for it to operate, a supply voltage of 4.5 Vis required. A maximum voltage of 5.5 V can be provided by it. This frequency can be achieved at 25 MHz. There is a logic IC D FLIP-FLOP used in the D flip flop. It has 2 functions. 20pins are available on this JK flip flop.
JM38510/37101B2A Features
Rail/Tube package
* series
20 pins
2 Bits
2 Functions
20 pin count
JM38510/37101B2A Applications
There are a lot of Texas Instruments
JM38510/37101B2A Flip Flops applications.
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
