IPS7071GTRPBF
Or copy the link below:
- Mfr.Part #
- IPS7071GTRPBF
- Manufacturer
- International Rectifier
- Package / Case
- Datasheet
- Download
- Description
- PROTECTED HIGH SIDE SWITCH
- Stock
- 44,455
- In Stock ：
- 44,455
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- International Rectifier
- Product Category :
- Power Distribution Switches, Load Drivers
- Output Type :
- N-Channel
- Product Status :
- Active
- Ratio - Input:Output :
- 1:1
- Input Type :
- Non-Inverting
- Output Configuration :
- High Side
- Mounting Type :
- Surface Mount
- Supplier Device Package :
- 8-SO
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Features :
- Auto Restart
- Interface :
- On/Off
- Rds On (Typ) :
- 80mOhm
- Voltage - Load :
- 6V ~ 35V
- Current - Output (Max) :
- 1.5A
- Number of Outputs :
- 1
- Switch Type :
- General Purpose
- Operating Temperature :
- -40°C ~ 150°C (TJ)
- Fault Protection :
- Current Limiting (Fixed), Open Load Detect, Over Temperature
- Datasheets
- IPS7071GTRPBF
N-Channel PMIC IPS7071GPBF 8 Pin 14V 8-SOIC (0.154, 3.90mm Width)
IPS7071GTRPBF Overview
The LED driver's packaged as a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There is a default setting of 1 for output.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Auto Restart features are available on the lighting driver.This object belongs to the IPS7071GPBF family.It contains 8 terminations.For operation, 8 pins are used.The LED driver has 1 functions.The maximum output current drops to 1.5A in order to meet the operation criteria.A supply voltage of 14V leads to high efficiency.The lighting driver is mounted in the way of Surface Mount.There is 80mOhm resistance on the LED driver.It is set to 1.5A in this case.In order to maximize efficiency, the supply voltage should be set at 35V.This LED driving board can accept voltages up to 35V volts as an input.The minimum input voltage is 6V volts.It requires 2.5mA current to operate.This electrical component is classified as Switch.
IPS7071GTRPBF Features
Supplied from 14V
Resistance of 80mOhm
IPS7071GTRPBF Applications
There are a lot of Infineon Technologies
IPS7071GTRPBF Power Switches ICs applications.
- Portable GPS Device
- Set-top-box
- USB Power Distribution
- Notebook PC
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
