FPF2313MPX

Share

Or copy the link below:

Mfr.Part #
FPF2313MPX
Manufacturer
onsemi
Package / Case
8-WDFN Exposed Pad
Datasheet
Download
Description
IC PWR SWITCH P-CHAN 1:2 8MLP
Stock
45,461
In Stock :
45,461

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
onsemi
Product Category :
Power Distribution Switches, Load Drivers
Package / Case :
8-WDFN Exposed Pad
Supplier Device Package :
8-MLP (3x3)
Input Type :
Non-Inverting
Fault Protection :
Current Limiting (Adjustable), Over Temperature, UVLO
Voltage - Supply (Vcc/Vdd) :
Not Required
Output Type :
P-Channel
Rds On (Typ) :
75mOhm
Output Configuration :
High Side
Ratio - Input:Output :
1:2
Mounting Type :
Surface Mount
Voltage - Load :
1.8V ~ 5.5V
Features :
Load Discharge, Slew Rate Controlled
Number of Outputs :
2
Interface :
On/Off
Operating Temperature :
-40°C ~ 85°C (TA)
Current - Output (Max) :
600mA
Switch Type :
General Purpose
Product Status :
Obsolete
Datasheets
FPF2313MPX
VESS Electronics offers Power Distribution Switches, Load Drivers onsemi FPF2313MPX, where excellence in quality meets cost-effectiveness. This premier offering shines with its comprehensive list of features, including Package / Case:8-WDFN Exposed Pad, Mounting Type:Surface Mount, Operating Temperature:-40°C ~ 85°C (TA), FPF2313MPX pinout, FPF2313MPX datasheet PDF, FPF2313MPX amp .Beyond Power Distribution Switches, Load Drivers onsemi FPF2313MPX ,we also present a selection of AP22966DC8-7, AP22800HB-7, AP22653W6-7, Our extensive stock is ready to fulfill your requirements. Connect with us now for tailored solutions.

P-Channel 0.65mm PMIC IntelliMAX™ Series FPF2313 8 Pin 3.3V 8-WDFN Exposed Pad

FPF2313MPX Overview


The LED driver's packaged as a Tape & Reel (TR).The 8-WDFN Exposed Pad package contains it.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There is a default setting of 2 for output.To operate, it needs a supply voltage of Not Required.The maximum output voltage is P-Channel volts.Load Discharge, Slew Rate Controlled features are available on the lighting driver.This object belongs to the FPF2313 family.It contains 8 terminations.For operation, 8 pins are used.The LED driver has 1 functions.A supply voltage of 3.3V leads to high efficiency.The lighting driver is mounted in the way of Surface Mount.There is 140mOhm resistance on the LED driver.This electrical component is included in the IntelliMAX™ series.It is set to 600mA in this case.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels available.In order to maximize efficiency, the supply voltage should be set at 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.The minimum input voltage is 1.8V volts.It requires 600mA current to operate.

FPF2313MPX Features


Supplied from 3.3V
Resistance of 140mOhm
2 channels


FPF2313MPX Applications


There are a lot of ON Semiconductor
FPF2313MPX Power Switches ICs applications.


  • Portable GPS Device
  • Set-top-box
  • USB Power Distribution
  • Notebook PC
  • Telecom and Network Systems
  • PC Card Hot Swap
  • Storage Drives
  • Portable/Handheld Devices
  • Wireless/Networking Cards
  • Low Voltage I/O System Power
Purchase

You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • Diodes Incorporated
    IC PWR DRIVER BIPOLAR 1:1 SOT23
  • Diodes Incorporated
    IC PWR SWITCH P-CHAN 1:1 SOT25
  • onsemi
    IC PWR DRIVER N-CHANNEL 1:1 SC74
  • Toshiba Electronic Devices and Storage Corporation
    IC PWR SWITCH P-CHAN 1:1 4WCSPD
  • Toshiba Electronic Devices and Storage Corporation
    IC PWR SWITCH P-CHAN 1:1 4WCSPD
RFQ