FPF2142

Share

Or copy the link below:

Mfr.Part #
FPF2142
Manufacturer
onsemi
Package / Case
6-WDFN Exposed Pad
Datasheet
Download
Description
IC PWR SWITCH P-CH 1:1 6MICROFET
Stock
18,243
In Stock :
18,243

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
onsemi
Product Category :
Power Distribution Switches, Load Drivers
Current - Output (Max) :
200mA
Switch Type :
General Purpose
Mounting Type :
Surface Mount
Output Type :
P-Channel
Interface :
On/Off
Number of Outputs :
1
Voltage - Supply (Vcc/Vdd) :
Not Required
Package / Case :
6-WDFN Exposed Pad
Operating Temperature :
-40°C ~ 85°C (TA)
Rds On (Typ) :
120mOhm
Supplier Device Package :
6-MicroFET (2x2)
Input Type :
Non-Inverting
Ratio - Input:Output :
1:1
Features :
Power Good, Status Flag
Fault Protection :
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Voltage - Load :
1.8V ~ 5.5V
Output Configuration :
High Side
Product Status :
Last Time Buy
Datasheets
FPF2142
VESS Electronics offers Power Distribution Switches, Load Drivers onsemi FPF2142, where excellence in quality meets cost-effectiveness. This premier offering shines with its comprehensive list of features, including Mounting Type:Surface Mount, Package / Case:6-WDFN Exposed Pad, Operating Temperature:-40°C ~ 85°C (TA), FPF2142 pinout, FPF2142 datasheet PDF, FPF2142 amp .Beyond Power Distribution Switches, Load Drivers onsemi FPF2142 ,we also present a selection of AP22966DC8-7, AP22800HB-7, AP22653W6-7, Our extensive stock is ready to fulfill your requirements. Connect with us now for tailored solutions.

P-Channel PMIC FPF2142 6 Pin 3.3V 6-VDFN Exposed Pad

FPF2142 Overview


The package is in the form of a Tape & Reel (TR).It is included in the package 6-VDFN Exposed Pad.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.Currently, the LED driving board is equipped with Power Good, Status Flag features.It is part of the FPF2142 family of LED drivers.It contains 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.The supply voltage can be 3.3V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.Lighting drivers with 120mOhm resistance are used.This case results in a 200mA output current.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.There is a maximum input voltage of 5.5V volts.The input voltage minimum is 1.8V volts.

FPF2142 Features


Supplied from 3.3V
Resistance of 120mOhm


FPF2142 Applications


There are a lot of ON Semiconductor
FPF2142 Power Switches ICs applications.


  • Telecom and Network Systems
  • PC Card Hot Swap
  • Storage Drives
  • Portable/Handheld Devices
  • Wireless/Networking Cards
  • Low Voltage I/O System Power
  • Hard Disk Drives
  • Solid-State Drives
  • Hot Swap
  • HDD and SSD
Purchase

You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • Diodes Incorporated
    IC PWR DRIVER BIPOLAR 1:1 SOT23
  • Diodes Incorporated
    IC PWR SWITCH P-CHAN 1:1 SOT25
  • onsemi
    IC PWR DRIVER N-CHANNEL 1:1 SC74
  • Toshiba Electronic Devices and Storage Corporation
    IC PWR SWITCH P-CHAN 1:1 4WCSPD
  • Toshiba Electronic Devices and Storage Corporation
    IC PWR SWITCH P-CHAN 1:1 4WCSPD
RFQ