FPF2103

Share

Or copy the link below:

Mfr.Part #
FPF2103
Manufacturer
onsemi
Package / Case
SC-74A, SOT-753
Datasheet
Download
Description
IC PWR SWITCH P-CHAN 1:1 SOT23-5
Stock
15,504
In Stock :
15,504

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
onsemi
Product Category :
Power Distribution Switches, Load Drivers
Output Configuration :
High Side
Number of Outputs :
1
Fault Protection :
Current Limiting (Fixed), Over Temperature, UVLO
Interface :
On/Off
Supplier Device Package :
SOT-23-5
Features :
Status Flag
Output Type :
P-Channel
Product Status :
Last Time Buy
Voltage - Supply (Vcc/Vdd) :
Not Required
Voltage - Load :
1.8V ~ 5.5V
Switch Type :
General Purpose
Rds On (Typ) :
125mOhm
Ratio - Input:Output :
1:1
Mounting Type :
Surface Mount
Current - Output (Max) :
200mA
Operating Temperature :
-40°C ~ 85°C (TA)
Package / Case :
SC-74A, SOT-753
Input Type :
Non-Inverting
Datasheets
FPF2103
VESS Electronics offers Power Distribution Switches, Load Drivers onsemi FPF2103, where excellence in quality meets cost-effectiveness. This premier offering shines with its comprehensive list of features, including Mounting Type:Surface Mount, Operating Temperature:-40°C ~ 85°C (TA), Package / Case:SC-74A, SOT-753, FPF2103 pinout, FPF2103 datasheet PDF, FPF2103 amp .Beyond Power Distribution Switches, Load Drivers onsemi FPF2103 ,we also present a selection of AP22966DC8-7, AP22800HB-7, AP22653W6-7, Our extensive stock is ready to fulfill your requirements. Connect with us now for tailored solutions.

P-Channel PMIC IntelliMAX™ Series FPF2103 5 Pin 3.3V SC-74A, SOT-753

FPF2103 Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package SC-74A, SOT-753.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of P-Channel volts has been specified.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the FPF2103 family.As a result, there are 5 terminations.In order to operate, 5 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 200mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.In this case, it is mounted in the way of Surface Mount.It has 160mOhm resistance.These electrical components are part of the IntelliMAX™ series.When this is the case, the output current is set to 200mA.Optimal efficiency requires a voltage of 5.5V.The maximum input voltage is 5.5V volts.A minimum input voltage of 1.8V volts is required for this LED driver.

FPF2103 Features


Supplied from 3.3V
Resistance of 160mOhm


FPF2103 Applications


There are a lot of ON Semiconductor
FPF2103 Power Switches ICs applications.


  • Storage Drives
  • Portable/Handheld Devices
  • Wireless/Networking Cards
  • Low Voltage I/O System Power
  • Hard Disk Drives
  • Solid-State Drives
  • Hot Swap
  • HDD and SSD
  • Hot Swap
  • Wireless Modem Data Cards
Purchase

You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • Diodes Incorporated
    IC PWR DRIVER BIPOLAR 1:1 SOT23
  • Diodes Incorporated
    IC PWR SWITCH P-CHAN 1:1 SOT25
  • onsemi
    IC PWR DRIVER N-CHANNEL 1:1 SC74
  • Toshiba Electronic Devices and Storage Corporation
    IC PWR SWITCH P-CHAN 1:1 4WCSPD
  • Toshiba Electronic Devices and Storage Corporation
    IC PWR SWITCH P-CHAN 1:1 4WCSPD
RFQ