CD74HC74E

CD74HC74E Overview

It is packaged in the way of 14-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. The output it is configured with uses Differential. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Through Hole. It operates with a supply voltage of 2V~6V. The operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 50MHz. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74HC74 family. It is powered from a supply voltage of 4.5V. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of HC/UH. This electronic part is mounted in the way of Through Hole. It is designed with 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The maximal supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. The output current of 5.2mA makes it feature maximum design flexibility. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 4μA of quiescent current without being affected by external factors. The number of channels is growing strong/weak: 2.

CD74HC74E Features

Tube package
74HC series
14 pins

CD74HC74E Applications

There are a lot of Texas Instruments
CD74HC74E Flip Flops applications.

• Digital electronics systems
• Computers
• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer