CD74HC4094MT

CD74HC4094MT Overview

There is an embedded device in the package 16-SOIC (0.154, 3.90mm Width). 16 is the sum of the number of terminations in the chip. The case Tape & Reel (TR) contains it. A voltage of 4.5V is specified for the part's operating supply. 16 pins are available on the device. Surface Mount is recommended for mounting. Electronic components belong to the HC/UH group. Mounting of this component is indicated by Surface Mount. There is a range of temperatures -55°C~125°C for operation. The voltage supplied to it is within the range of 2V~6V. In the 74HC series, this electrical component is found. Similar parts can be found using the 74HC4094 family. In terms of supply voltage, this chip operates within the range of 5V. This section has the following additional features: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. This part should have a minimum supply voltage (Vsup) of at least 2V. As far as the device is concerned, there are 1 input lines available. Voltage can be delivered at 2/6V by the device. A maximum supply voltage (Vsup) of 6V may be applied to this part. It is necessary to operate 10 output lines of the system. There is a quiescent current of 8μA in this circuit. To package the part, TR is used. This device operates at a frequency of 60MHz.

CD74HC4094MT Features

With 16 pins
Mounted in Surface Mount type.
Based on 74HC4094 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
Packing Method : TR

CD74HC4094MT Applications

There are a lot of Texas Instruments
CD74HC4094MT Shift Registers applications.

• Pseudo Random Pattern Generator
• Pulse Extenders
• Pattern Recognizers
• Interconnectors
• Counter
• Data manipulation
• Delay Line
• Generate time delay toward digital circuits
• Parallel data
• Parallel to serial converter