CD74HC174M96

CD74HC174M96 Overview

It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. The operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 35MHz. D latch consists of 1 elements. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74HC174 family. It is powered from a supply voltage of 4.5V. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of HC/UH. This electronic part is mounted in the way of Surface Mount. It is designed with 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This flip flop is designed with 6 Bits. The maximal supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. 7 circuits are used to achieve its superior flexibility. This D flip flop is well suited for TR based on its reliable performance. The output current of 5.2mA makes it feature maximum design flexibility. There are 6 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 8μA of quiescent current without being affected by external factors. It is also characterized by DUMMY VAL.

CD74HC174M96 Features

Tape & Reel (TR) package
74HC series
16 pins
6 Bits

CD74HC174M96 Applications

There are a lot of Texas Instruments
CD74HC174M96 Flip Flops applications.

• Digital electronics systems
• Computers
• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer