CD74ACT174E

CD74ACT174E Overview

It is packaged in the way of 16-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. The output it is configured with uses Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74ACT series. Its output frequency should not exceed 80MHz. D latch consists of 1 elements. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74ACT174 family. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of ACT. This electronic part is mounted in the way of Through Hole. It is designed with 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This flip flop is designed with 6 Bits. 7 circuits are used to achieve its superior flexibility. It operates from 5V power supplies. The supply voltage should be maintained at 5V for high efficiency. The output current of 24mA makes it feature maximum design flexibility. There are 6 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. It consumes 8μA of quiescent current without being affected by external factors.

CD74ACT174E Features

Tube package
74ACT series
16 pins
6 Bits
5V power supplies

CD74ACT174E Applications

There are a lot of Texas Instruments
CD74ACT174E Flip Flops applications.

• Digital electronics systems
• Computers
• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer