BD7757MWX-E2

Share

Or copy the link below:

Mfr.Part #
BD7757MWX-E2
Manufacturer
ROHM Semiconductor
Package / Case
14-UFDFN Exposed Pad
Datasheet
Download
Description
IC LED DRIVER CTRLR 1.5A 14USON
Stock
3,948
In Stock :
3,948

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
ROHM Semiconductor
Product Category :
LED Drivers
Operating Temperature :
-30°C ~ 85°C (TA)
Voltage - Supply (Min) :
2.7V
Type :
DC DC Controller
Frequency :
2MHz
Current - Output / Channel :
1.5A (Flash)
Dimming :
-
Product Status :
Active
Applications :
Camera Flash
Voltage - Supply (Max) :
5V
Topology :
Step-Up (Boost)
Internal Switch(s) :
Yes
Package / Case :
14-UFDFN Exposed Pad
Number of Outputs :
1
Mounting Type :
Surface Mount
Supplier Device Package :
USON014X3020
Voltage - Output :
-
Datasheets
BD7757MWX-E2
VESS Electronics offers LED Drivers ROHM Semiconductor BD7757MWX-E2, where excellence in quality meets cost-effectiveness. This premier offering shines with its comprehensive list of features, including Operating Temperature:-30°C ~ 85°C (TA), Type:DC DC Controller, Package / Case:14-UFDFN Exposed Pad, Mounting Type:Surface Mount, BD7757MWX-E2 pinout, BD7757MWX-E2 datasheet PDF, BD7757MWX-E2 amp .Beyond LED Drivers ROHM Semiconductor BD7757MWX-E2 ,we also present a selection of AL5809-120P1-7, AL5809-100P1-7, AP5724WG-7, Our extensive stock is ready to fulfill your requirements. Connect with us now for tailored solutions.

PMIC 2MHz 14-UFDFN Exposed Pad

BD7757MWX-E2 Overview


Using its 14-UFDFN Exposed Pad package, it is possible to save board space. LED drivers design with 1 outputs.This mounting method is Surface Mount.The system emerges as a DC DC Controller with high efficiency.It is capable of working normally at -30°C~85°C TA.Camera Flash has considerable advantages.A frequency of 2MHz is used to operate it.It is possible that failures will occur if the voltage supply is below 2.7V.The voltage range of this device is optimized for a maximum supply voltage of 5V.This device produces a voltage of 5.1V as its output.

BD7757MWX-E2 Features


Available in the 14-UFDFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Frequency of 2MHz
Output voltage of 5.1V


BD7757MWX-E2 Applications


There are a lot of ROHM Semiconductor
BD7757MWX-E2 LED Driver ICs applications.


  • Gallery lighting
  • Museum lighting
  • High-end retail lighting
  • Medical surgery lighting
  • Replacement lamps
  • Panel lighting
  • Down lights
  • Linear fluorescent
  • A- lamps
  • General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
Purchase

You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

RFQ