BA4560F-E2
Or copy the link below:
- Mfr.Part #
- BA4560F-E2
- Manufacturer
- ROHM Semiconductor
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOP
- Stock
- 20,097
- In Stock ：
- 20,097
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- ROHM Semiconductor
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Slew Rate :
- 4V/µs
- Current - Input Bias :
- 50 nA
- Voltage - Input Offset :
- 500 µV
- Current - Output / Channel :
- 25 mA
- -3db Bandwidth :
- -
- Current - Supply :
- -
- Amplifier Type :
- General Purpose
- Gain Bandwidth Product :
- 10 MHz
- Product Status :
- Active
- Voltage - Supply Span (Min) :
- 8 V
- Mounting Type :
- Surface Mount
- Voltage - Supply Span (Max) :
- 30 V
- Operating Temperature :
- -40°C ~ 85°C
- Supplier Device Package :
- 8-SOP
- Output Type :
- -
- Number of Circuits :
- 2
- Datasheets
- BA4560F-E2
2 Channels 25mA per Channel 50nA 70 dB Instrumentational OP Amps 0.5μA 15V 8V~30V ±4V~15V BA4560 8 Pins 8-SOIC (0.173, 4.40mm Width)
BA4560F-E2 Overview
In the package, you will find a 8-SOIC (0.173, 4.40mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 8 pins on it. Op amp rates 6mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 4mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 100dB for the time being. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 15V. The linear amplifier is packaged by using a TAPE AND REEL axis.
BA4560F-E2 Features
8 Pins
supply voltage of 15V
100dB voltage gain
BA4560F-E2 Applications
There are a lot of ROHM Semiconductor
BA4560F-E2 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
