BA3834F-E2

BA3834F-E2 Overview

Packaged in a 18-SOIC (0.213, 5.40mm Width) package, it is easy to install.Packaged in a Tape & Reel (TR) format, it is a very good product.In the case of this gadget, the mounting type is Surface Mount.The filter type for this part is Band Pass.With a power source of 4.5V~6.5V, it should work.18-pins are present on both sides of the device.Filter is important to point out that the best component of the device is the BA3834.As the reflow temperature reaches 260, it reaches its peak.During all periods of operation, 5V is used as a source of power for the component.There are a number of filters, called 7, and each filter has a unique figure.At 6.5V, the maximum supply voltage (Vsup) is reached and the circuit is completed.Filter is important to remember that 18 is the pin number of the component.A device with 5V supplies is being used.A greater voltage must be supplied, Vsup, than the voltage consumed, 4.5V.Depending on the model, the maximum supply temperature can be raised to 15mA.This is one of a number of Surface Mount mount packages that are included with the package.Filter is recommended that Filter be warmer than -25°C when operating.As far as the part type is concerned, it is of the Active type.

BA3834F-E2 Features

Supply voltage of 5V
Mount of Surface Mount

BA3834F-E2 Applications

There are a lot of ROHM Semiconductor
BA3834F-E2 active filters applications.

• Sample Rate Converters
• Digital Down Conversion
• D/A and A/D pre/post Filtering
• Tuning Bandwidth Expansion for HSP45116 and HSP45106
• Quadrature, Complex Flterlng
• Image Processing
• Polyphase Flterng
• Adaptive Fllterlng
• Very Narrow Band Fllters
• Zoom Spectral Analysis