BA2902FV-E2
Or copy the link below:
- Mfr.Part #
- BA2902FV-E2
- Manufacturer
- ROHM Semiconductor
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SSOPB
- Stock
- 45
- In Stock ：
- 45
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- ROHM Semiconductor
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Current - Output / Channel :
- 30 mA
- Number of Circuits :
- 4
- Voltage - Supply Span (Max) :
- 32 V
- Slew Rate :
- 0.2V/µs
- Operating Temperature :
- -40°C ~ 125°C
- Mounting Type :
- Surface Mount
- Current - Input Bias :
- 20 nA
- Supplier Device Package :
- 14-SSOP-B
- Current - Supply :
- 700µA
- -3db Bandwidth :
- -
- Output Type :
- -
- Voltage - Supply Span (Min) :
- 3 V
- Amplifier Type :
- General Purpose
- Voltage - Input Offset :
- 2 mV
- Gain Bandwidth Product :
- 500 kHz
- Product Status :
- Active
- Datasheets
- BA2902FV-E2
30mA per Channel 20nA 50 dB Instrumentational OP Amps 0.25μA 16V 3V~32V ±1.5V~16V BA2902 14 Pins 14-LSSOP (0.173, 4.40mm Width)
BA2902FV-E2 Overview
In order to protect the op amps, a 14-LSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 700μA and 10 . Maintain 100dB as the voltage gain. In total, there are 4 circuits on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 16V.
BA2902FV-E2 Features
14 Pins
supply voltage of 5V
100dB voltage gain
BA2902FV-E2 Applications
There are a lot of ROHM Semiconductor
BA2902FV-E2 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
