AS358AP-E1
Or copy the link below:
- Mfr.Part #
- AS358AP-E1
- Manufacturer
- Diodes Incorporated
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8DIP
- Stock
- 1,900
- In Stock ：
- 1,900
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Diodes Incorporated
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Current - Output / Channel :
- 40 mA
- Voltage - Supply Span (Min) :
- 3 V
- Current - Input Bias :
- 20 nA
- Voltage - Supply Span (Max) :
- 36 V
- Voltage - Input Offset :
- 2 mV
- Number of Circuits :
- 2
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Output Type :
- -
- -3db Bandwidth :
- -
- Supplier Device Package :
- 8-PDIP
- Amplifier Type :
- General Purpose
- Slew Rate :
- -
- Mounting Type :
- Through Hole
- Product Status :
- Active
- Current - Supply :
- 700µA (x2 Channels)
- Gain Bandwidth Product :
- -
- Datasheets
- AS358AP-E1
40mA per Channel 20nA 60 dB Instrumentational OP Amps 3V~36V ±1.5V~18V 8-DIP (0.300, 7.62mm)
AS358AP-E1 Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. Op amp ic rates 2mV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 700μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 100dB. This op amp ic has 2 circuits. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. For optimal performance, this electrical part should be connected to a supply with a current of 700μA. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. Keeping the linear amplifier's supply voltage above 3V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 18V volts.
AS358AP-E1 Features
100dB voltage gain
AS358AP-E1 Applications
There are a lot of Diodes Incorporated
AS358AP-E1 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
