93C76T-E/SN

93C76T-E/SN Overview

As far as memory types are concerned, Non-Volatile is considered to be its memory type. In addition, memory ics is available in a Tape & Reel (TR) case as well. In the case of 8-SOIC (0.154, 3.90mm Width), it is embedded within the case. A memory chip with a capacity of 8Kb 1K x 8 512 x 16 is used on this device. There is a mainstream memory format used by this device, which is called EEPROM-format memory. This device has an extended operating temperature range of -40°C~125°C TA, so it's perfect for a wide range of demanding applications. It is capable of handling a voltage supply of 4.5V~5.5V. As far as the mounting type is concerned, Surface Mount is recommended. On the chip, there are 8 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. In the memory, there is a clock frequency rotation that ranges 2MHz. In order to select similar parts, typical manufacturers refer to 93C76 as the device's base part number. The memory device has an 8-pin package, which encloses it in a small package. I have noticed that the memory device has 8 pins, which indicates that it has 8 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 3mA. The memory chip also offers 1000000 ERASE/WRITE CYCLES; DATA RETENTION > 200 YEARS; USER CONFIGURABLE AS 512 X 16 to level up system performance despite its merits. There is only a single power supply required for this memory chip. This part plays an important role in applications that target the -- series of memory devices. The MICROWIRE-type serial bus this memory integrates with is helpful for transferring data to the CPU. As far as the supply current is concerned, it can be operated with a maximum of 0.003 mA of currentThere is a need for a programming voltage of 4.5 V to 5.5 V in order to modify the state of some nonvolatile memory arrays. In most cases, this memory ics is regarded as being a type of Memory & Data Storage. This chip has the memory IC type EEPROM. There is a suggestion that the device should operate on an 3 mA-amp supply currentThis device has a number of terminals which is 8, which is the number of terminals it has. Depending on the device, there may be up to 13 Programmable I/Os. It does not seem reasonable that this ic memory chip would be able to handle more than 1 timers or counters at a time.

93C76T-E/SN Features

Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
Operating Supply Voltage:5V
Additional Feature:1000000 ERASE/WRITE CYCLES; DATA RETENTION > 200 YEARS; USER CONFIGURABLE AS 512 X 16
13 Programmable I/Os

93C76T-E/SN Applications

There are a lot of Microchip Technology
93C76T-E/SN Memory applications.

• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM