8401101DA
Or copy the link below:
- Mfr.Part #
- 8401101DA
- Manufacturer
- Texas Instruments
- Package / Case
- -
- Datasheet
- Download
- Description
- SN54ALS74A DUAL POSITIVE-EDGE-TR
- Stock
- 47
- In Stock ：
- 47
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Flip Flops
- Output Type :
- -
- Clock Frequency :
- -
- Number of Bits per Element :
- -
- Type :
- -
- Function :
- -
- Number of Elements :
- -
- Voltage - Supply :
- -
- Operating Temperature :
- -
- Current - Quiescent (Iq) :
- -
- Input Capacitance :
- -
- Product Status :
- Active
- Current - Output High, Low :
- -
- Max Propagation Delay @ V, Max CL :
- -
- Mounting Type :
- -
- Package / Case :
- -
- Supplier Device Package :
- -
- Trigger Type :
- -
- Datasheets
- 8401101DA
2 Bit Flip Flop DUAL 14 Pins * Series
8401101DA Overview
As part of the package Rail/Tube, it is embedded. In the configuration, TTLis used as the output. This trigger uses the value POSITIVE EDGE. In terms of FPGAs, it belongs to the * series. The element count is 2 . A device of this type belongs to the family of ALS. It is mounted in the way of Surface Mount. There are 14pins on it. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latch base part number. An electronic part with 2bits has been designed. It reaches 5.5 Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 4.5 V. A reliable performance of this D flip flop makes it well suited for use in TUBE. A power supply of 5 Vis required to operate it. If high efficiency is to be achieved, the supply voltage should be maintained at 5 V. A high level output current of -400 µAis set. In the low level output current setting, the current is set to 4 mA. Ideally, the operating temperature should be below 125 °C. If the operating temperature is higher than -55 °C, the system should operate properly. In order for it to operate, a supply voltage of 4.5 Vis required. A maximum voltage of 5.5 V can be provided by it. This frequency can be achieved at 25 MHz. There is a logic IC D FLIP-FLOP used in the D flip flop. It has 2 functions. 14pins are available on this JK flip flop.
8401101DA Features
Rail/Tube package
* series
14 pins
2 Bits
5 V power supplies
2 Functions
14 pin count
8401101DA Applications
There are a lot of Texas Instruments
8401101DA Flip Flops applications.
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
