74HC574D
Or copy the link below:
- Mfr.Part #
- 74HC574D
- Manufacturer
- Toshiba Electronic Devices and Storage Corporation
- Package / Case
- Datasheet
- Download
- Description
- IC FF D-TYPE SNGL 8BIT 20SOIC
- Stock
- 2,000
- In Stock ：
- 2,000
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Toshiba Electronic Devices and Storage Corporation
- Product Category :
- Flip Flops
- Input Capacitance :
- 5 pF
- Product Status :
- Active
- Output Type :
- Tri-State, Non-Inverted
- Max Propagation Delay @ V, Max CL :
- 33ns @ 6V, 150pF
- Clock Frequency :
- 59 MHz
- Voltage - Supply :
- 2V ~ 6V
- Trigger Type :
- Positive Edge
- Current - Output High, Low :
- 7.8mA, 7.8mA
- Number of Bits per Element :
- 8
- Supplier Device Package :
- 20-SOIC
- Type :
- D-Type
- Mounting Type :
- Surface Mount
- Number of Elements :
- 1
- Current - Quiescent (Iq) :
- 4 µA
- Function :
- Standard
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Datasheets
- 74HC574D
2V~6V 59MHz 8 Bit D-Type Flip Flop DUAL 20 Pins 4μA 74HC Series 20-SOIC (0.295, 7.50mm Width)
74HC574D Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). You can find it in the Cut Tape (CT)package. It is configured with Tri-State, Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. A voltage of 2V~6Vis required for its operation. Temperature is set to -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In FPGA terms, D flip flop is a type of 74HCseries FPGA. Its output frequency should not exceed 59MHz Hz. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current. Terminations are 20. The power source is powered by 4.5V. A JK flip flop with a 5pFfarad input capacitance is used here. Electronic devices of this type belong to the HC/UHfamily. With its 20pins, it is designed to work with most electronic flip flops. The design is based on 8bits. Vsup reaches 6V, the maximal supply voltage. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. The D flip flop has no ports embedded. It offers maximum design flexibility with its output current of 7.8mA. This building block contains 8 gates as its basic building block.
74HC574D Features
Cut Tape (CT) package
74HC series
20 pins
8 Bits
8 gates
74HC574D Applications
There are a lot of Toshiba Semiconductor and Storage
74HC574D Flip Flops applications.
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
