74ACT16823DL
Or copy the link below:
- Mfr.Part #
- 74ACT16823DL
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC FF D-TYPE DUAL 9BIT 56SSOP
- Stock
- 44,613
- In Stock ：
- 44,613
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Flip Flops
- Current - Output High, Low :
- 24mA, 24mA
- Max Propagation Delay @ V, Max CL :
- 11.5ns @ 5V, 50pF
- Output Type :
- Tri-State, Non-Inverted
- Current - Quiescent (Iq) :
- 8 µA
- Trigger Type :
- Positive Edge
- Input Capacitance :
- 3 pF
- Voltage - Supply :
- 4.5V ~ 5.5V
- Supplier Device Package :
- 56-SSOP
- Number of Bits per Element :
- 9
- Mounting Type :
- Surface Mount
- Product Status :
- Active
- Clock Frequency :
- 90 MHz
- Number of Elements :
- 2
- Type :
- D-Type
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Function :
- Master Reset
- Datasheets
- 74ACT16823DL
4.5V~5.5V 90MHz 18 Bit D-Type Flip Flop DUAL 74ACT16823 56 Pins 74ACT Series 56-BSSOP (0.295, 7.50mm Width)
74ACT16823DLR Overview
As a result, it is packaged as 56-BSSOP (0.295, 7.50mm Width). The package Cut Tape (CT)contains it. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. It belongs to the 74ACTseries of FPGAs. There should be no greater frequency than 90MHzon its output. There are 2 elements in it. In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74ACT16823. The power supply voltage is 5V. Its input capacitance is 3pF farads. It is a member of the ACTfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 56. Its clock edge trigger type is Positive Edge. The flip flop is designed with 18bits. The superior flexibility of this product is achieved by using 1 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. There are 5V power supplies attached to it. There are 2 ports embedded in the flip flops. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. Its output current of 24mAallows for maximum design flexibility. It is designed with 3 output lines. As a result, it consumes 8μA of quiescent current without being affected by external factors. WITH CLEAR AND CLOCK ENABLEis also one of its characteristics.
74ACT16823DLR Features
Cut Tape (CT) package
74ACT series
56 pins
18 Bits
5V power supplies
74ACT16823DLR Applications
There are a lot of Texas Instruments
74ACT16823DLR Flip Flops applications.
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
