74ACT11074D
Or copy the link below:
- Mfr.Part #
- 74ACT11074D
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC FF D-TYPE DUAL 1BIT 14SOIC
- Stock
- 312
- In Stock ：
- 312
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Flip Flops
- Max Propagation Delay @ V, Max CL :
- 8.5ns @ 5V, 50pF
- Output Type :
- Complementary
- Number of Bits per Element :
- 1
- Supplier Device Package :
- 14-SOIC
- Number of Elements :
- 2
- Clock Frequency :
- 125 MHz
- Product Status :
- Active
- Current - Quiescent (Iq) :
- 4 µA
- Current - Output High, Low :
- 24mA, 24mA
- Trigger Type :
- Positive Edge
- Mounting Type :
- Surface Mount
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Type :
- D-Type
- Function :
- Set(Preset) and Reset
- Input Capacitance :
- 3.5 pF
- Voltage - Supply :
- 4.5V ~ 5.5V
- Datasheets
- 74ACT11074D
4.5V~5.5V 125MHz D-Type Flip Flop DUAL 74ACT11074 14 Pins 74ACT Series 14-SOIC (0.154, 3.90mm Width)
74ACT11074D Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. The Tubepackage contains it. T flip flop is configured with an output of Differential. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74ACT series. This D flip flop should not have a frequency greater than 125MHz. A total of 14terminations have been recorded. The 74ACT11074 family contains it. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 3.5pF farads at the input. It belongs to the family of electronic devices known as ACT. There is an electronic part that is mounted in the way of Surface Mount. The 14pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. The superior flexibility of this circuit is achieved by using 2 circuits. A total of 5V power supplies are needed to run it. Optimal efficiency requires a supply voltage of 5V. This T flip flop features a maximum design flexibility due to its output current of 24mA. In order for the chip to function, it has 1output lines. Quiescent current is consumed by the D latch in the amount of 4μA.
74ACT11074D Features
Tube package
74ACT series
14 pins
5V power supplies
74ACT11074D Applications
There are a lot of Texas Instruments
74ACT11074D Flip Flops applications.
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
