34AA02T-E/MS

34AA02T-E/MS Overview

As far as memory types are concerned, Non-Volatile is considered to be its memory type. In addition, memory ics is available in a Tape & Reel (TR) case as well. In the case of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), it is embedded within the case. A memory chip with a capacity of 2Kb 256 x 8 is used on this device. There is a mainstream memory format used by this device, which is called EEPROM-format memory. This device has an extended operating temperature range of -40°C~125°C TA, so it's perfect for a wide range of demanding applications. It is capable of handling a voltage supply of 1.7V~5.5V. As far as the mounting type is concerned, Surface Mount is recommended. On the chip, there are 8 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 2.5V. In the memory, there is a clock frequency rotation that ranges 400kHz. In order to select similar parts, typical manufacturers refer to 34AA02 as the device's base part number. The memory device has an 8-pin package, which encloses it in a small package. I have noticed that the memory device has 8 pins, which indicates that it has 8 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 3mA. There is only a single power supply required for this memory chip. This part plays an important role in applications that target the -- series of memory devices. Temperatures below -40 °C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 125 °C, otherwise damage to the part may occur as a result of overheating. The I2C-type serial bus this memory integrates with is helpful for transferring data to the CPU. As far as the supply current is concerned, it can be operated with a maximum of 0.003 mA of currentThere is a need for a programming voltage of 1.7 V to 5.5 V in order to modify the state of some nonvolatile memory arrays. In most cases, this memory ics is regarded as being a type of Memory & Data Storage. It is recommended that this part be supplied with at least 1.7 V volts. The operating voltage shall not exceed 5.5 V. A ic memory chip like this one processes data at a frequency of 400 kHz bits per second. There is a maximum frequency of up to 400 kHz for this memory. This chip has the memory IC type EEPROM. There is a suggestion that the device should operate on an 3 mA-amp supply currentThis device has a number of terminals which is 8, which is the number of terminals it has.

34AA02T-E/MS Features

Package / Case: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
8 Pins
Operating Supply Voltage:5V
Freguency at 400 kHz
400 kHz terminals

34AA02T-E/MS Applications

There are a lot of Microchip Technology
34AA02T-E/MS Memory applications.

• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM