25LC010A-E/P

25LC010A-E/P Overview

A Non-Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tube case as well. Embedded in the 8-DIP (0.300, 7.62mm) case, memory ics is a single file. On the chip, there is an 1Kb 128 x 8 memory, which is the size of the chip's memory. There is a EEPROM-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of -40°C~125°C TA, this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 2.5V~5.5V volts. The recommended mounting type for memory ics is Through Hole. A total of 8 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 5V will be necessary. A clock frequency rotation within 10MHz is used for the ic memory chip to rotate data. Similar parts are frequently selected using the ic memory chip's base part number, 25LC010A. A 8-pin package containing this memory device is used to house this device. The memory device in question has 8 pins, thus indicating that it has 8 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 5V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Through Hole mounting. There is a nominal supply current rating of 5mA for this memory component. This chip features all the merits of a conventional chip, but it also features DATA RETENTION > 200 YEARS; 1,000,000 ERASE/WRITE CYCLES to improve system performance. As for power supplies, this memory chip requires just 3/5 V . It is an important component of the -- series memory devices used in a variety of applications. Its SPI-type serial bus helps transfer data to the CPU efficiently. In order to operate your device, you will need to provide a maximum supply current of 0.005 mA. A programming voltage of 3.3 V, 5 V is required to change a nonvolatile memory array's state. Usually, this memory ics falls under the Memory & Data Storage component category. This chip contains a EEPROM type of memory IC. A device such as this has the number 8 of terminals within it.

25LC010A-E/P Features

Package / Case: 8-DIP (0.300, 7.62mm)
8 Pins
Operating Supply Voltage:5V
Additional Feature:DATA RETENTION > 200 YEARS; 1,000,000 ERASE/WRITE CYCLES

25LC010A-E/P Applications

There are a lot of Microchip Technology
25LC010A-E/P Memory applications.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card