24AA01-I/ST

24AA01-I/ST Overview

There is a memory type Non-Volatile for this type of device. The case comes in the Tube style. The file is embedded in a 8-TSSOP (0.173, 4.40mm Width) case. This chip has an 1Kb 128 x 8 size of memory on it, so a lot of data can be stored on it. Memory data is stored in EEPROM-format, which is common in mainstream devices. -40°C~85°C TA is an extended operating temperature range, making this device ideal for demanding applications. A supply voltage of 1.7V~5.5V can be applied to it. There is a recommended mounting type of Surface Mount for it. The chip contains 8 terminations. As many as 1 functions are supported for comprehensive working. During the rotation of the clock, the ic memory chip is set as 400kHz. As the base part number for the device, 24AA01 is frequently used to select similar items. A package of 8 pins is used to protect this memory device. The memory device has 8 pins, which means that it has 8 memory locations, which indicates it is an 8-bit device. This memory runs on an 1.7 V to 5.5 V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 3mA. The power supply needed for this memory chip is only 2/5V . -- series memory ics play a crucial role in the target applications of this part. There must be at least an -40 °C operating temperature for this device. The part should not be operated at temperatures above 85 °C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. In order for the memory ics to transfer data to the CPU, this memory integrates with a I2C-type serial bus. This device can be operated from a maximum supply current of 0.003 mA under ideal conditions. 1.7 V to 5.5 V programming voltage is required to change the state of certain nonvolatile memory arrays. The component is usually referred to as a type of Memory & Data Storage. This part should have a minimum supply voltage of 1.7 V. A maximum voltage of 5.5 V shall be allowed for its operating voltage. As a result of the frequency of this memory chip, data can be processed at a rate of 400 kHz. In terms of speed, this memory can operate at a maximum frequency of 400 kHz. In this chip, there is a memory IC of type EEPROM. It is suggested to operate the device with a supply current of 0.1 mA, 0.05 mA. As far as the number of terminals is concerned, this device has 8 terminals.

24AA01-I/ST Features

Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins
Operating Supply Voltage:1.7 V to 5.5 V
Freguency at 400 kHz
400 kHz terminals

24AA01-I/ST Applications

There are a lot of Microchip Technology
24AA01-I/ST Memory applications.

• personal computers
• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic